fluted planters and plant riser
Decor

Easy to Make DIY Plant Risers and Dowel Planters

I’m not great at keeping plants alive but I love having some greenery in my home! Therefore, I’ve opted for a few plants that are easy to take care of and a lot of faux plants. I love the current dowel trend so I decided to combine my love for plants and dowels by making some plant risers and dowel planters. This is a super simple project that has a lot of room for customization depending on your style preferences. Let’s dive into how to make plant risers and dowel planters!

Thanks to Minwax for sponsoring this post. I received compensation and free product from Minwax but all opinions stated here are my own. This post contains affiliate links which means I may get a small commission off any purchases made from my links. It’s no extra cost to you.

Time to Complete

This project took me three days to complete. You could probably tackle it in two days if you had periods of time to devote to it throughout the two days to allow for adequate dry times.

Tools & Materials for DIY Plant Risers and Dowel Planters

Plant Riser Tools & Materials

Dowel Planter Materials

Click HERE to find a local retailer for Minwax products!

Step by Step Tutorial for Plant Risers & Dowel Planters

Step 1: Lightly sand the wood rounds

Using 220 grit sandpaper, lightly sand the wood rounds. Then use a tack cloth to remove any dust.

Sanding wood rounds for plant risers

Step 2: Apply Minwax Oil Based Pre-Stain Wood Conditioner to wood rounds and legs

Since I planned to use an oil-based stain on the wood rounds, I first applied an oil-based pre-stain wood conditioner. Pre-stain wood conditioner helps prepare wood for staining and helps prevent blotchiness. It is especially important to use when you are working with soft woods like pine. Pine can stain unevenly if you don’t first apply pre-stain wood conditioner.

Applying Minwax prestain wood conditioner

Apply it with a rag. Let it penetrate the wood for 5-15 mins. Then wipe off any excess with a rag. Only one coat is needed.

Step 3: Within 2 hours, apply Minwax Oil Based Wood Finish Stain in Special Walnut

Special Walnut is one of my very favorite stain colors! I’ve used it all over my home, including on my giant pony wall built-ins. It’s a gorgeous, rich color from Minwax.

Applying Minwax Wood Finishin Stain to Plant Riser

Apply it with a rag, making sure to apply in the direction of the grain. Let it penetrate the wood for 5-15 minutes. The longer you let it sit, the darker the color will be. Wipe off any excess with a clean rag. I only applied one coat but if you want to darken the color, simply wait 2 hours and apply the stain in the same way you did the first time.

Step 4: After 24 hours, apply Minwax Polycrylic Protective Finish in Matte Finish

When staining, it’s best to apply a topcoat to adequately protect the wood. When using oil-based stains, you can protect the wood with Minwax Fast-Drying Polyurethane or Minwax Polycrylic Protective Finish in Matte Finish. If you use the polycrylic as I did, you must wait 24 hours before applying it.

Apply Minwax Polycrylic Protective Finish with a Purdy 2” XL Sprig Paintbrush. Ensure that it’s a thin coat. Allow it to dry for at least 2 hours. Then lightly sand it with 220 grit sandpaper. Apply another coat. I applied 2 coats.

Step 5: Attach legs to wood rounds using wood glue

Attach the legs to the bottom of your wood rounds. Wood glue is sufficient for a strong bond. I chose to make two varieties of plant risers: One with round legs and one with ribbed wheel legs. You can choose whatever style legs you like best!

Attaching legs to plant risers

Step 6: Start working on the planters by cutting wood dowels to size

Using a miter saw or a miter box and hand saw, cut the wood dowels to the height of your round paper mache boxes. To make it go faster, I taped about 7 dowels together using painters tape and cut them all at once.

Cutting Wood Dowels

Step 7: Glue wood dowels onto round boxes

Using wood glue or another strong adhesive, glue the wood dowels to the round boxes. Line them up snugly against one another and keep going until wood dowels cover the entire outside of each box.

Attaching wood dowels to wood dowel planters

To keep the dowels in place while the glue dries, you can wrap painter’s tape around the dowels. Allow them to dry for at least 2 hours. Waiting 24 hours will ensure the strongest bond.

All dowels on DIY dowel planters

Step 8: Lightly sand the wood dowels

Using 220 grit sandpaper, lightly sand the dowels. Pay special attention to the ends of them where they might need a little extra sanding if they weren’t perfectly cut. Use a tack cloth to remove any dust.

Step 9: Apply Minwax Water-Based Pre-Stain Wood Conditioner to the wood dowels

Since I planned to use water-based stain on the planters, I needed to first apply water-based pre-stain wood conditioner. This helps prevent blotchiness and it controls grain raising. I’ve made it a habit to always apply pre-stain wood conditioner before I stain anything! This step helps make sure that you love the end product.

Applying prestain wood conditioner to dowel planters

Apply Minwax Water-Based Pre-Stain Wood Conditioner with a Purdy 2” XL Sprig Paintbrush. After 1-5 minutes, remove any excess with a rag.

After 15-30 minutes, lightly sand the dowels with 220 grit sandpaper. Remove any dust with a tack cloth.

Step 10: Apply Minwax Wood Finish Water-Based Solid Color Stain in Vintage Blue

I LOVE Minwax’s color stains. They come in 200+ colors. They have both semi-transparent and solid opacity. They dry in an hour. They clean up with soap and water. They are easy to apply because the stain is 5 times thicker than traditional oil-based stains. And last but not least, they leave a gorgeous finish on wood!

I’ve tried this product in various colors and so far, my very favorite color is their Vintage Blue, which is Minwax’s 2021 Color of the Year. It’s a soft blue color with green and gray undertones. It’s earthy and calming. It’s perfect.

Applying Minwax solid color stain to diy dowel planters

Apply Minwax Wood Finish Water-Based Solid Color Stain in Vintage Blue with a Purdy 2” XL Sprig Paintbrush. Make sure to apply it going with the direction of the wood grain. Immediately (within 2 minutes) remove any excess stain with a synthetic pad.

Step 11: After 2-3 hours, apply Minwax Polycrylic Protective Finish in Matte Finish to protect the wood finish

To protect the wood, apply Minwax Polycrylic Protective Finish with a Purdy 2” XL Sprig Paintbrush. This protective finish comes in many different sheens. I prefer a matte finish but feel free to choose whichever sheen you prefer.

Applying polycrylic to diy wood dowel planters

Apply a light coat. After 2 hours, lightly sand it with 220 grit sandpaper. Remove dust with a tack cloth and apply a second coat for additional protection.

Step 12: Add your favorite real or faux plants to the planters

I chose two real plants and one faux plant. A trick to making faux plants look real: Use real dirt in the planters! Put the faux plants into real dirt so that they look more realistic.

The Finished Plant Risers & Dowel Planters!

Now your plant risers and dowel planters should be all set to go. Style them on your dining room table, in a bay window or on the middle of your kitchen island.

Completed plant riser and 3 DIY dowel planters

These items also make great gifts for others – housewarming gifts, birthday gifts and more. What do you think of them? Would you try making some too?

Up close view of plant riser and DIY dowel planters

Looking for More Home DIY Project Ideas?

For more inspiration from Minwax, click here!